Tags

, , , , , , , , ,

-The Sixth China International Conference on High-Performance Ceramics

•February 23, 2009 • Comments Off

The joint EC-China NANOCOFC workshop (2nd) will be organized joint with
The Sixth China International Conference on

High-Performance Ceramics (CICC-6)

August 16 ~ 19, 2009, Harbin, China.
Papers contributed to this workshop will be reviewed and selected for publication as a special issue or invited papers of International Journal for Energy Research. The papers published in this issue shold focus on the energy dimension of the NANOCOFC, e.g., novel energy applications, fuel cell performance, LTSOFC characteristics, etc. Pure material papers may fall outside the scope.
The deadline for submission is  on 15, March, 2009.
regards,
Bin Zhu

3rd International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies (MPA)

•February 23, 2009 • No Comments

Dear Colleagues,

I am pleased to announce to you the 3rd International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies (MPA), which will be held in Manchester (UK) during 21-23 July 2009. More details on the event can be found from the website http://www.mpa-meeting.com

Topics of MPA-2009:

1. Tribology and Lubrication Science

2. Surface Technology (Coatings; Thick & Thin Films; Surface Fabrication, Modification & Characterisation)

3. Materials for Energy Applications

4. Biomaterials & Nanomedicine

5. Carbon Nanotubes

MPA-2009 HIGHLIGHTS

Plenary lecture – the plenary lecture will be given by Nobel Laureate Professor Sir H. W. Kroto (Florida State University, USA).

Invited talks – there will be a host of invited people from academia and industry.

Posters – there will be poster display sessions in between the technical talks. We are looking to give out prizes for the best poster presentations.

Oral contributions – people from academia and those from industry or those doing industrial work will be given the opportunity to give short 10-15 minute presentations on their most recent work.

Exhibition – companies will have the opportunity to exhibit during this event which will attract people from all over the world.

Interactive discussion forum – the conference will end with an interactive open discussion forum consisting of academics and industrialists all under one roof discussing issues relating to materials, processes and applications of nanotechnology.

Publications – papers presented during MPA-2009 will be considered for publication in special issues of the following journals:

• Journal of Nanoscience and Nanotechnology

• Journal of Nano Research (JNanoR)

• Surface Engineering

• Lubrication Science

You can submit your abstracts by sending them to abstracts@mpa-meeting.com

The abstract submission deadline is 30 March 2009.

I look forward to receiving your abstracts and hopefully seeing you during MPA-2009.

Sincerely

Dr Nasar Ali, MPA 2009 Chairman

Members of organizing committee:

A. N. K. Jadoon, BP (Co-Chairman)
S. Hutchins, Keronite Ltd, UK
S. Balakrishnan, Mercedes-Benz High Performance Engines, UK
A. Neville, University of Leeds, UK
D. Haynie, Artificial Cell Technologies, USA
V. Teixeira, University of Minho, Portugal
M. Chipara, University of Texas Pan American, USA

V. F. Neto, University of Aveiro, Portugal

A. Abdel Aal, CMRDI, Egypt

**

Photocatalytic Products and Technologies Conference – PPTC’09

•February 26, 2009 • Comments Off

Photocatalytic Products and Technologies Conference – PPTC’09

University of Minho, Guimaraes, Portugal during May 11-13, 2009.

http://www.fisica.uminho.pt/pptc09

PPTC’09 is the first Portuguese conference on photocatalysis and it will be a milestone for all researchers who are interested in this area and its applications. We’ll meet in the wonderful city of Guimarães to resume in three days the major advances in this field, discuss the industrial applications, on-going investigation and also potential networking opportunities. Furthermore, this conference will coincide with a COST Action 540 »PHONASUM« PHOTOCATALYTIC TECHNOLOGIES AND NOVEL NANOSURFACES MATERIALS – CRITICAL ISSUES Management Committee meeting, therefore broadening the interest scope and networking possibilities.

Photocatalytic Materials

Over the last few years there has been a growing interest in the field of semiconductor photo-chemistry regarding the development of self-cleaning materials. Particular nanocrystalline thin films and nanoparticles are capable of acting as photoactive and photocatalytic materials, due to their intrinsic ability of removing pollutants in the gas phase or dissolved in water. The photocatalyst material plays an important role in the dissociation and mineralization of organic impurities on a particular surface, such as on glass, ceramic, metal or a polymer. The vehicle for this photocatalisation is simply solar light. Understanding the fundamental process and enhancing the photocatalytic efficiency of known catalysts has become a major research focus, bearing in mind industrial applications as materials that possess anti-fogging, self-cleaning or antibacterial activities for general purpose surfaces.

Topics of the conference:

 Fundamental Science of Photocatalysis

 Treatments of Water, Air and Soil Including Solar Technologies

 Visible Light Responsive Photocatalyts

 Dye-sensitized Solar Cells

 Synthesis of New Photocatalytic Materials

 Photocatalytic antimicrobial Materials

 Photocatalytic Membranes

 Photocatalytic Reactors

Conference chair:

Carlos José Tavares

Departamento de Física

Universidade do Minho

Campus de Azurém

4800-058 Guimarães

Portugal

Telephone: +351 253 510 474

Fax: +351 253 510 461

e-mail: ctavares@fisica.uminho.pt

http://online.uminho.pt/projectos/grf/

**

ENN Produces China’s First 5.7m2 Tandem Junction Solar Panels on Applied Materials SunFab Thin Film Line

•March 19, 2009 • Comments Off

SANTA CLARA, Calif.–(BUSINESS WIRE)–ENN Solar Energy Co., Ltd. announced today that it has produced China’s first 5.7m2 high-efficiency, tandem junction thin film photovoltaic (PV) panels using a SunFab™ Thin Film Line, rated at 60 megawatts per year, supplied by Applied Materials, Inc. Working together at ENN’s leading-edge facility in Langfang, China, ENN and Applied achieved this milestone just five months after equipment installation. These ultra-large PV panels are nearly four times larger than conventional modules on the market and use Applied’s innovative tandem junction technology to deliver significantly higher conversion efficiencies at competitive costs.

“By combining the high efficiency of tandem junction technology with ultra-large 5.7m2 substrates, we’re able to deliver modules that dramatically reduce installed cost per watt,” said Dr. Rick Wan, General Manager of ENN Solar. “Our close association with Applied Materials has enabled ENN to build a winning platform, combining our next-generation solar technology with our world-class manufacturing capability.”

“We are committed to delivering the highest level of technology innovation and manufacturing excellence to our customers,” said Dr. Randhir Thakur, senior vice president and general manager of Applied Materials’ SunFab Thin Film Solar and Display Business Group. “ENN’s rapid ramp from equipment installation to producing tandem junction panels is an example of the unique capabilities that Applied delivers – unparalleled research and development, technology and manufacturing innovation, and global service and support for our customers.”

About ENN Solar Energy

ENN Solar Energy – a member of ENN Group – is a leader in the manufacturing of large-size thin film module products. The company produces and markets high performance silicon thin film modules of up to 5.7m2 per panel at low cost. Focusing on technology innovation and the environmental improvement, ENN Solar’s mission is to make clean renewable energy more affordable and available worldwide. Learn more at http://www.ennsolar.com.

About Applied Materials

Applied Materials, Inc. (Nasdaq:AMAT) is the global leader in Nanomanufacturing Technology™ solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panel displays, solar photovoltaic cells, flexible electronics and energy efficient glass. At Applied Materials, we apply Nanomanufacturing Technology to improve the way people live. Learn more at http://www.appliedmaterials.com.

Photos/Multimedia Gallery Available: http://www.businesswire.com/cgi-bin/mmg.cgi?eid=5918638&lang=en

**

EuroNanoForum 2009 – Nanotechnology for Sustainable Economy

•April 15, 2009 • 1 Comment

EuroNanoForum 2009
Nanotechnology for Sustainable Economy
European and International Forum on Nanotechnology
2-5 June, 2009
Prague, Czech Republic

EuroNanoForum 2009 is the fourth conference of a set of international nanotechnology conferences organized within the framework of national Presidencies of the European Union. It will be a 4-day conference taking place from 2nd to 5th of June 2009, at the Prague Congress Centre, as an official event of the Czech Presidency, under the auspices of the Czech Ministry for Education Youth and Sports and with the support of the Industrial Technologies Programme of the European Commission. Focusing on “Nanotechnology for sustainable economy”, EuroNanoForum 2009 will address the contribution and challenges of nanotechnology research for a sustainable development of European industry and society, such as the need for reduction in carbon emissions and fossil fuels dependence, the substantial increase in energy demand, pollution control, clean water management and sustainable quality of life of the European citizen, as well as material production sustainability and efficiency. In this respect, nanotechnology presents many opportunities and challenges that have to be analyzed at international level through a safe, responsible and integrated approach, as first presented by the ENF2003 conference.

By addressing the state-of-the art of key application areas of nanotechnology research and development, the Forum will create a unique opportunity for researchers and industrial experts coming from diverse fields of science and technology to meet, discuss and co-operate, and to contribute to the definition of a European nanotechnology strategy after 2009.

In addition to the different sessions, the thematic workshops, and the poster exhibition with award attribution, an industrial exhibition will show the state-of-the-art of the implementation of nanotechnology into industrial products.

The EuroNanoForum 2009 conference will also be accompanied by an independent and unique set of outreaching and communication activities devoted to the general public.

A roadshow exhibition of the NanoTruck (www.nanotruck.de) on the theme “nanoTruck – High tech from the nano cosmos”, will demonstrate the potential applications of nanotechnologies and their socio-economic impact.

source: http://www.euronanoforum2009.eu/

***

European Research Connection 2009

•April 15, 2009 • No Comments

European Research Connection Conference
“networking our way to a research future”
Prague
07.-08. May 2009

Come and join us!
Are you a scientist, full of new ideas?
Or an entrepreneur, looking for solutions or an investment opportunity?
Or perhaps a researcher, willing to take the international challenge?
Realise your dreams and get support for your projects. We want to meet you! Join us at the biggest European research event of the year: in Prague, from 7 to 8 May 2009, under the Czech Presidency of the European Union.

The budget of the European Commission for research and innovation is increasing every year and we can show you how to participate. You will get first-hand information about priorities, objectives and participation rules. In special sessions you will get concrete tips. We will be paying particular attention to promising ideas from the New Member States.

During two whole days, we will bring you into contact with experienced researchers from successful European projects, giving you the opportunity to meet reliable partners for your projects. In fact, the conference is full of opportunities!

Selected EU-funded projects will be exhibited. This will promote the networking and integration of research activities in Europe. A call for proposals targeting potential exhibitors has been published. Exhibitors will come at their own expenses.
The conference and exhibition will take place in Prague from 7 to 8 May 2009 under the Czech Presidency of the European Union. The participation fee will be €50 for the two days. One-day passes will be available for €30.

more info at: http://ec.europa.eu/research/conferences/2009/rtd-2009/index_en.cfm

**

[from:]

***
On behalf of the organizing committee, I would like to invite you to participate in the International Conference on Nanoscience and Technology, China 2009 (ChinaNANO 2009) which will be held between September 1-3, 2009 in Beijing, China. This is the third conference following the successful ChinaNANO 2005 and ChinaNANO 2007 held in 2005 and in 2007 in Beijing, respectively.
ChinaNANO 2009 is intended to stimulate discussions on the forefront of research in nanoscience and nanotechnology. The conference will focus on nano-information materials, nano-energy and environmental materials, nanodevices and sensors, nanomedicine, nanopharmacy and biomedical engineering, nanofabrication and nanometrology, characterization of nanostructures, nano-optics and plasmonics, as well as modeling and simulation of nanostructures. We sincerely hope that the scope of the conference will serve the interest of the scientific community, as well as the industry and the general public. I wish to extend my welcome to all participants and sponsors of the event.
***

NanoteC is one of the longest running series of international nanoscale carbon conferences in Europe (since 1998). It brings together scientists working with nanoscale carbon materials: nanotubes, graphene, diamond- and fullerene-related nanostructures. While each of these materials attracts its own dedicated community of researchers, NanoteC draws on common themes and allows researchers to share insight into this unique element at the nanoscale. Elemental carbon shows remarkable variety in properties via simple covalent bonding, however other systems (for example containing nitrogen or metals) are becoming important and provide alternative components with unique mechanical and electronic properties. Nanotechnology requires an understanding of these materials on an atomic level and this will be the central theme. The NanoteC conferences are renowned for their relaxed and friendly atmosphere, with emphasis on discussion and participation. We endeavour to achieve as much student participation as possible, and we anticipate that the keynote talks will be strongly influential on the next generation of nanotechnology scientists. Contributed talks are also mainly attributed to young researchers. This year NanoteC09 will be in Brussels, Belgium, with 120 to 150 participants from around the world, 12 sessions (non-parallel) with about 10 keynote and 30 contributed talks, as well as a poster session, with posters available for discussion throughout the conference.

Timings and Social Programme

The conference begins at midday Wednesday 26th August 2009 and finishes midday Saturday 29th August. Buffet lunch is available on the 26th. All lunches are included in registration fee, as well as dinner on August 26th and the Conference Dinner on August 28th (Dinner on August 27th is not included).

Early registration deadline:Wednesday 24th June

Conference:Wednesday August 26th – Saturday 29th 2009

  • Round table debate: a general and open discussion will be held on themes such as carbon nanotube and nanocomposites production, nanocarbon characterisation, ethics and communication, etc. These are intended to give new people to the field a rapid introduction, and those more established to explore a topic in some detail together.
  • The NanoteC Roadmaps: We plan to devise development roadmaps for different aspects of nanocarbon science and technology (for example nanotube production, sample standardisation)
  • Breaking News Lectures: If presenting a poster, attendees may register for a “breaking news” slot; depending on demand there will be programme slots available for particularly new and exciting results.
  • Student Participation: We’ve negotiated special cheap room rates for students. As always we try our best to encourage student participation at the conference, keeping the student fee as low as possible. A variety of student travel bursaries are available (see menu on the left)
  • The conference will also incorporate a growth and synthesis session, as well as a microscopy session organised in cooperation with the Royal Microscopical Society. It will also include a science communication session, where the crucial issue of communication and public dialogue will be discussed.
***
SPECIAL ISSUE
AFM Advanced Functional Materials
Vol. 18 #23
Int. Conference on Nanoscience and Nanotechnology 2008, guest-edited by Paul Mulvaney.

More

RELATED PRODUCTS

Advanced Materials
Advanced
Materials

Advanced Functional Materials
Advanced Functional Materials

Advanced Engineering Materials
Advanced Engineering Materials

Chemical Vapor Deposition
Chemical Vapor Deposition

Small
Small

Adv Biomater
Advanced Biomaterials

Advanced Biomaterials: A new section of Advanced Engineering Materials starting in April 2008!

Click on the covers to find out more about our must-have materials science journals.

Latest Impact Factor
Advanced Materials Advanced Materials
The Impact Factor increased to

8.191*

Publishing a mixture of reviews and rapid communications, Advanced Materials is one of the most influential journals in the field.

* ISI Journal Citation Report 2007

Go to Advanced Materials

NOW AVAILABLE

SISupporting Information for selected articles is available free of charge. Links are available from the table of contents and from the abstract page (near the full-text links). Otherwise, please check the “Additional Material” section of the abstract and HTML full-text pages.

See an example.

http://www3.interscience.wiley.com/journal/10008336/home?CRETRY=1&SRETRY=0

***

2009 Nanotechnology-Enabled Sensing Workshop

logoThe NNI-sponsored Workshop on Nanotechnology-Enabled Sensing is part of a series sponsored by NNI participating Federal agencies. The workshop will be held May 5-7, 2009 at the Sheraton National Hotel in Arlington, Virginia. Leading experts will assess the nanotechnology research community’s long-term goals and key challenges in the area of sensing. Please note that advance registration is required.

NIH Nanoweek 2009

NIHA series of nanotechnology events was held on the NIH campus in Bethesda, Maryland from April 7-10, 2009. On Tuesday, April 7th, leading researchers introduced basic concepts and medical applications. Wednesday included presentations and lab demonstrations by NIH scientists, and on Thursday and Friday, a joint IEEE/NIH workshop was held on nanomedicine. For agendas and additional information, visit www.capconcorp.com/nanoweek2009

http://www.nano.gov/

Big Things from a Tiny World

Nanotechnology: Big Things from a Tiny WorldNew nanotechnology brochure released. The world of nanotechnology can be difficult for a non-scientist to grasp, and few publications for general readers exist. Now, the National Nanotechnology Coordination Office (NNCO), with assistance from scientists in the 25 agencies of the National Nanotechnology Initiative, has produced a brochure that is geared to a broad public:

Nanotechnology: Big Things from a Tiny World

Funding Opportunities

NNIEvery week the NNI will be updating the latest nanotechnology and nanoscience-related funding opportunities drawn from announcements from agency websites, grants.gov, Commerce Business Daily and other government databases.

Check out the latest nanotechnology articles in this edition of the Nano Flyer.

Interested? • Click here

http://www.nano.gov/
***

Links

Please note: Below are institutions involved in nanotechnology research and/or information dissemination. Unfortunately, it is not possible for all institutions involved in nanotechnology to be listed on this page.

Nanotechnology Research and Education Centers

Arizona State University
The Nanostuctures Research Group
Applied NanoBioscience Center

Brown University
Computational Nanotechnology
Nano and Micromechanics Laboratory

California Institute of Technology
Roukes Research Group

Central Michigan University
The National Dendrimer & Nanotechnology Center

Columbia University
Center for Electronic Transport in Molecular Nanostructures

Cornell University
Cornell Nanoscale Science and Fabrication Facility
Center for Nanoscale Systems, Nanoscale Science and Engineering Center (NSEC)
Nanobiotechnology, Science and Technology Center

Dept. of Defense
Dept. of Defense Research Laboratories, Nanoscience and Technology
Multidisciplinary University Research Initiatives
Defense University Research Initiatives on NanoTechnology

Dept. of Energy, Office of Science
Nanoscale Science Research Centers

Georgia Institute of Technology
Nanoscience + Nanotechnology @ Georgia Tech

Harvard University
Nanoscale Systems and their Device Applications (NSEC)

Howard University
Keck Center for the Design of Nanoscale Materials for Molecular Recognition

Lawrence Berkeley National Lab
National Center for Electron Microscopy

Massachusetts Institute of Technology
Institute for Soldier Nanotechnologies
Nanostructures Laboratory
Space Nanotechnology
Nanoscience and Nanotechnology In Depth

Materials and Process Simulation Center (MSC)
Applied Physics at Caltech

National Aeronautics and Space Administration
Ames Center for Nanotechnology
Institute for Nanoelectronics and Computing
Nano-and Opto-Electronics Team
Nanotechnology Home Page

NASA-Nanotechnology Team
Nanotech Home Page

National Institute of Standards and Technology
Advanced Measurements Laboratory
Center for Neutron Research

National Nanofabrication Infrastructure Network (NNIN)

Naval Research laboratory
Nanoscience Institute
Nanoscience Research Laboratory

Ned Seeman’s Laboratory Homepage
Pioneer of DNA nanotechnology

North Carolina State University/U. North Carolina
North Carolina Center for Nanoscale Materials

Northeastern University
Center for High-rate Nanomanufacturing

Northwestern University
Electronic Transport in Molecular Nanostructures (NSEC)
Institute for Nanotechnology (NSEC)
Center for Transportation Nanotechnology
Integrated Nanopatterning and Detection (NSEC)
Center for Nanofabrication and Molecular Self-Assembly
National Center for Learning & Teaching in Nanoscale Science & Engineering

Pacific Northwest National Laboratory

Nano Science, Engineering, and Technology

Fundamental & Computational Sciences Directorate

Penn State University
Industrial Opportunities from Nanotechnology Manufacturing Technologies

Princeton University
Biologically Inspired Materials Institute (BIMat)
Institute for the Science and Technology of Materials
Center for Complex Materials

Purdue University
Nanotechnology Simulation Hub
Nanoscale Physics

Rensselaer Polytechnic Institute (NY)
Directed Assembly of Nanostructures NSEC
Materials Science and Engineering Department

Rice University
Center for Biological and Environmental Nanotechnology
Center for Nanoscale Science and Technology
Nanoscience in Biological and Environmental Engineering (NSEC)
The Smalley Group
Professional Master’s Program in Nanoscale physics
San Diego Supercomputer Center (SDSC)
A National Laboratory for Computational Science
Stanford University
Stanford NanoFabrication Facility

State University of New York at Stony Brook
USB Buckyball homepage, Physics Department

Texas A&M University
Institute for Intelligent Bio-Nanomaterials & Structures for Aerospace
Vehicles

University of Albany (SUNY)
Center of Excellence in Nanoelectronics

University of Arkansas, University of Oklahoma
Center for Semiconductor Physics in Nanostructures

University of California-Davis
Nanophases in the Environment, Agriculture, and Technology (NEAT)

University of California-Irvine
Integrated Nanosystems Research Facility

University of California-Los Angeles
Institute for Cell Mimetic Space Exploration
California NanoSystems Institute

University of California-Santa Barbara
California NanoSystems Institute
Nanotech Fabrication Facility
University of Central Florida
Nanoscience Technology Center

University of Delaware
Multiuniversity NSF NIRT Project

University of Florida
The Center for Structural Biology

University of Illinois at Urbana-Champaign
Beckman Institute for Advanced Science and Technology
Center for Nanoscale Science and Technology

University of Michigan
<!–a href=”http://nano.med.umich.edu/projects.html&#8221; onclick=”MM_popupMsg(‘You are about to go to a web site outside the NNI. We have provided a link to this site because it may have information that is of interest to our users. The NNI is not responsible for material contained at this site.’)”>Center for Biologic Nanotechnology<br–> Life Sciences at Michigan

University of Minnesota
Center for Nano-Energetics Research,

University of North Carolina
Center for Computer Integrated Systems for Microscopy and Manipulation
(CISMM) at UNC Chapel Hill
Nanoscale Science Education Center
Nanoscale Science Research Group
North Carolina Center for Nanoscale Materials

University of Notre Dame
Center for Nanoscience and Technology

University of South Carolina

NanoCenter at the University of South Carolina

University of Southern California
The Laboratory for Molecular Robotics

University of Texas at Austin
Center for Nano and Molecular Science and Technology

University of Virginia
Center for Nanoscopic Materials Design

University of Washington
Center for Nanotechnology

University of Wisconsin-Madison
Center for Nanotechnology

Virginia Tech
Center for Self-Assembled Nanostructures and Devices

Washington University, Durint — Bioimetics

Widener University
Chemistry Department

Yale University
Mark A. Reed Research Group
Nanotechnology Laboratory

section divider

Research Publications

Nano Letters, American Chemical Society

Nanotechnology, the Institute of Physics

The Journal of Nanoparticle Research, Kluwer Academic Publishers

Virtual Journal of Nanoscience and Technology
, edited by David Awschalom
Department of Physics, University of California, Santa Barbara

Biomedical Microdevices (BioMEMS and Medical Nanotechnology), Kluwer Academic Publishers

section divider
Professional Societies

American Chemical Society
Chemical & Engineering News, Nanofocus

American Society of Mechanical Engineers
Nanotechnology Institute

American Vacuum Society
Nanometer scale S&T Division

Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Nanotechnology Council
IEEE SFBA Nanotechnology Council
Materials Research Society
Nanotechnology Initiative

section divider

International Resources

Green Facts: Nanotechnologies
European Commission Scientific Committee on Emerging and Newly Identified Health Risks

Nanotechnology Research Institute (Japan)

Cordis (European Research)

Cranfield University, School of Industrial and Manufacturing Science
UK Dept. of Advanced Materials, Current nanotechnology

Delft University of Technology
Nanophysics

International Nanotechnology and Society Network

Institute of Nanotechnology (UK)
Nano Pioneers
Nano Vocabulary
Daily News
Book Division
Moscow State University
Laboratory of Frontier Carbon Materials

Nanoforum (European Union)

Paul Scherrer Institute
Laboratory for Micro and Nanotechnology: Molecular Nanotechnology

Swiss Federal Institute of Technology
Institute of Robotics and Intelligent Systems

The Institut de Genie Atomique (IGA) of the Physics Department
Nanomechanics: Spectroscopy and Imaging

University of Birmingham, UK
The Nanoscale Physics Research Laboratory

University of Copenhagen

University of Glasgow
Nanoelectronics research centre

University of Sussex,UK
Fullerene Group Homepage

University of Ulm and the TMR-Network, Denmark
NanoSNOM

http://www.nano.gov/html/res/links.html
National Nanotechnology Initiative
***
The Tesla Coil

The Tesla Coil


http://www.teslasociety.com/teslacoil.htm

Links to other Tesla Organizations | Tesla and the exploration of Cosmos

Tesla Coil

The Tesla coil is one of Nikola Tesla’s most famous inventions. It is essentially a high-frequency air-core transformer. It takes the output from a 120vAC to several kilovolt transformer & driver circuit and steps it up to an extremely high voltage. Voltages can get to be well above 1,000,000 volts and are discharged in the form of electrical arcs. Tesla himself got arcs up to 100,000,000 volts, but I don’t think that has been duplicated by anybody else. Tesla coils are unique in the fact that they create extremely powerful electrical fields. Large coils have been known to wirelessly light up florescent lights up to 50 feet away, and because of the fact that it is an electric field that goes directly into the light and doesn’t use the electrodes, even burned-out florescent lights will glow.


http://www.teslasociety.com/teslacoil.htm
***
http://cientifica.eu/files/Whitepapers/nanoporous_materials_WP.pdf

[PDF]

NANOPOROUS MATERIALS

File Format: PDF/Adobe Acrobat
Nanoporous membranes. Some of the most interesting applications for nanoporous membranes come from the ability of nanopores of certain sizes to let some substances pass and others not . . .
My note –
this is a really incredible explanation and covers some of the exciting possibilities with nanoporous materials science. – By Cientifica.
***
High volume fabrication of customised nanopore membrane chips
http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6V0W-47X1H8G-6&_user=10&_rdoc=1&_fmt=&_orig=search&_sort=d&view=c&_acct=C000050221&_version=1&_urlVersion=0&_userid=10&md5=eedc708f45bb734f8f14cf45262a4c8c

L. J. HeydermanCorresponding Author Contact Information, E-mail The Corresponding Author, a, B. Ketterera, D. Bächlea, F. Glausa, B. Haasa, H. Schifta, K. Vogelsanga, J. Gobrechta, L. Tiefenauera, O. Dubochetb, P. Surbledb and T. Hesslerb

a Laboratory for Micro- and Nanotechnology, Paul Scherrer Institut, CH-5232, Villigen PSI, Switzerland

b Leister Process Technologies, CH-6060, Sarnen, Switzerland

Available online 11 February 2003.


Abstract

We present a procedure for high volume fabrication of nanopore membrane chips, combining low cost hot embossing for nanopore replication and conventional photolithography for manufacture of the membranes, alignment marks and break lines. The embossing masters are fabricated by electron beam lithography allowing customisation of the nanopore design. Nanopore membrane chips containing four membranes were fabricated and three of the membranes were structured with arrays of pores with three different diameters. Several different nanopore periods were tested. For pillar sizes in the embossing master of 460, 250 and 95 nm, optimization of the pattern transfer process resulted in nanopore sizes of 550, 330 and 140 nm. For the minimum periods employed for these three pore sizes of 1000, 500 and 300 nm, respectively, the membranes were found to be stable. This fabrication technology opens the way for high volume batch processing of nanostructured membranes, facilitating new avenues for research and technology.

Author Keywords: Hot embossing lithography; Nanoimprint lithography; Nanostructured membrane; Silicon micromachining

Article Outline

1. Introduction
2. Fabrication process
3. Processing issues
3.1. Conclusion
References
**
Related Articles in ScienceDirect
View More Related Articles
**

Simple Electric Generator – Video
1 min 16 sec
http://www.metacafe.com

Magnetic motor electric generator
1 min 24 sec
http://www.youtube.com

This is an AC electric generator which lights up a tiny incandescent light bulb. The generator is made from a hollow-ended cardboard box with a nail through the center. The box has many turns of fine copper wire wound around it, with four large magnets clamped around the nail. When the nail and magnets are spun fast by hand, the little light bulb lights up dimly.
I wrote this article because I found lots of projects for making a simple electric motor, but nobody gave the secret for making a generator. Well, here it is: use strong magnets, lots of fine wire, and a special light bulb which only needs 1/2 volt. Also, don’t bother making a “commutator,” just hook the wires directly to the bulb. It’s much simpler that way, but the generator will produce AC (alternating current).

Before you start, here are some notes: you must use a special light bulb. Normal flashlight bulbs will not work. Also, you must use the large, strong magnets shown in the parts list. Smaller magnets won’t work. The wire must be #30 gauge or smaller. Also, you can improve the generator if you buy lots of extra kits of wire and wind it on the cardboard, since the bulb will light up even when the generator spins slowly. Three kits of Radio Shack wire is expensive, it’s cheaper to order just one $1.50 solenoid, but you’ll, need vise-grips pliers to pry apart the steel frame and remove the spool of wire.

SHORTCUTS:                                                                     NEXT PAGE->

SEE ALSO:
–     STATIC ELECTRICITY PROJECTS
–     VANDEGRAAFF MACHINES
–     SUPERMAGNET FUN
–     ELECTRICITY PROJECTS

–     SODA-BOTTLE MOTOR
–     RIDICULOUS CHARGE DETECTOR
–     MORE SCIENCE PROJECTS FOR KIDS


STUPID BILL B. VIDEOS! educational too. But no less stupid!

DRAW A HOLOGRAM

DIY GENERATOR

MICROWAVE MAYHEM

BOTTLE SMASH!

EATING dry ice!

DANGEROUS MAGLEV!

MORE PROJECTS |    EVEN MORE PROJECTS |    |    MY ELECTRICITY EXPLANATIONS

HISTORY OF “ULTRA SIMPLE” GENERATOR

While running the tech shop at the Museum of Science in Boston, I was working on new ideas for exhibits for the Electricity Hall in 1988. I knew that the Exploratorium had an electric generator exhibit where the museum visitor would yank a plastic-embedded coil plate through a row of huge magnets (magnetron horn-magnets from a military radar.) Doing so would light up a small bulb. I just knew that there HAD to be a way which uses more common magnets. So I stacked up a pile of 3″ loudspeaker magnets (those black donut things) and waved it past various coils. Finally I wound about five pounds of #26 wire around a ring of nails pounded into a board, hooked up a #49 light bulb, then moved the stack of speaker magnets in and out. This easily lit up the bulb.
Around 1994 I was thinking about the ultra-simple electric motor which later became known on internet as the “Beakman Motor.” Wouldn’t it be cool if kids could also make an electric generator that simple? But it should be possible with parts from a Radio Shack store, since Radio Shack had the special light bulb as well as magnets and spools of electromagnet wire. After a few hours of experimenting I fould that I could just barely light up the 20 milliamps bulb by using a single spool of #30 wire from radio shack. But the wire had to be VERY close to a fast spinning magnet, and the magnet had to be composed of four powerful ceramic magnets in a stack.

MAGNET WARNING

WARNING: Keep the magnets away from computers, disks, videotapes, color TV sets, and from wallets and purses containing credit cards. Try this: Keep the generator far from your color TV, turn on the TV, start spinning the nail so the magnet is spinning fast, then bring the generator about 2ft away from the TV screen. DON’T BRING IT CLOSER!!! Keep spinning the magnets, and you’ll see a cool wobbling effect in the TV picture, along with some color changes. The field from the magnet is bending the electron beam that paints the picture on the screen. Be careful, if you bring the magnet about 15cm away, the iron sheet inside the TV picture tube will become magnetized and the distorted colors will be permanent.
*****
My note –
All the directions for this project are on the site link above and it is really thought-provoking and inspiring, actually.
***

Sponsoring and Exhibitions

Click here to Download further details for exhibitors / conference sponsors. The conference will host typically 100-120 delegates, all active researchers in the field of carbon based nanotechnology. This will provide an excellent opportunity to raise awareness amongst the research community of your products and expertise. Exhibition space will be available next to the area used for posters, which will be available for viewing throughout the conference. There will also be a timetabled poster session.The following facilities are available:

  • Exhibition Space: 1000 Euros, including one free non-residential registration.
  • Conference Supporters: Conference supporters will be acknowledged on the conference website and also via either inserts in delegate conference packs or space within the abstract booklet. Key sponsors will optionally also appear on the conference bags.
  • Poster Prize: We would also be interested to hear from potential sponsors for the conference Poster prize.
***

Manufacturing and Services

The Manufacturing and Services (MAS) unit of the International Trade Administration (ITA) is dedicated to enhancing the global competitiveness of U.S. industry, expanding its market access, and increasing its exports. (more) (MAS Overview at a Glance)


Recent News in MAS

International Visitor Spending Hits All Time High: Travelers Pump $12.7 Billion into U.S. Economy

Washington (Nov. 6) – The U.S. Department of Commerce today announced that 5.6 million international visitors traveled to the United States in August 2008, an increase of 6 percent over August 2007. International visitors spent a record $12.7 billion in August 2008, a 20 percent increase over August 2007. (more)

<!–3/10/08
Gutierrez Announces Record Tourism in 2007

Commerce Secretary Carlos M. Gutierrez announces an all time record for international tourism.

Washington (March 10)—In remarks to the National League of Cities, Commerce Secretary Carlos M. Gutierrez announced that 2007 set an all time record for international tourism, with visitors pumping $122 billion into the U.S. economy from over 56 million international visitors supporting 8.5 million American jobs. “This is yet another record-breaking year for the US travel and tourism industry and another year in which it produced a healthy trade surplus,” Gutierrez said.
(Remarks) (Press Release) (Fact Sheet)

2/5/08
U.S. Commerce Secretary to Deliver Keynote Address to “Powering Our Low Carbon Future” Conference

1/24/08
116 U.S. Cities Are "Billion Dollar Markets" — New data series measures exports of goods from U.S. metropolitan areas
–>                                                                           (more)

MAS Reports

November, 2008
Promoting Competitiveness: Partnerships and Progress of the Office of Manufacturing and Services

7/17/2008
Clean Energy Exporter Guides Released
Resource Unveiled for U.S. Clean Energy Companies Looking to Export to China and India.
(more)


Manufacturing and Trade Associations

Contact a manufacturing or services sector expert.

Spotlights
Exports from U.S. Metropolitan Areas Exports from U.S. Metropolitan Areas Visas and FDI Visas and FDI

Manufacturing Biweekly Update Manufacturing Biweekly Update Sustainable manufacturing event Sustainable Manufacturing Initiative
http://trade.gov/mas/index.asp
***

How to Make an Inexpensive Vertical Wind Turbine – Part 1

Visit Blog at http://berezin.com/jeff for details. Part 2 is now done and covers power generation: http://www.youtube.com/watc… Harness the wind for less than $100. DIY vertical wind turbine …

http://www.youtube.com/watch?v=9UPe6A_UVPc

***

Going with the Wind

A homemade vertical turbine can supply big power at little cost

By Doug Cantor Posted 07.06.2007 at 2:00 am

by John B. Carnett: HOW IT WORKS As the wind turns the wings, magnets in the alternator spin, generating voltage in the wire coils. The current travels through wires to a rectifier, which converts the voltage to DC, and then to a bank of batteries. John B. Carnett

The slow-turning vertical-axis design is most efficient in gusts of 6 to 20 mph, so it’s ideal for relatively low-wind areas like western Michigan, where he lives. You can download plans at windstuffnow.com to build your own Lenz2. It’s not a quick weekend project, but once it’s up and running, paying the electric bill should be a breeze.

Build a Vertical Wind Turbine
Cost: $300
Time: 3 Days
Easy | | | | |
Hard

  1. Construct the wings

    Cut teardrop shapes from plywood, connect with four-foot rods, and cover with aluminum.

  2. Build the alternator

    Glue magnets to two steel discs, tape copper-wire coils to a plywood disc (the “stator”), and slide all three discs over the shaft.

  3. Attach the parts

    Clamp both ends of the shaft to the rectangular frame. Weld the wings’ arms to the bottom disc on the alternator, as well as to a steel disc at the top of the turbine.

  4. Mount the frame

    Attach cables to the frame arms and stabilize with sandbags.

  5. Power the house

    Wire the alternator to a rectifier, a device that converts the power from AC to DC, and connect it to the batteries. It takes four to six hours for Lenz’s turbine to fully charge his bank of eight batteries.

Another Build: The $30 Open-Source Turbine Go to velacreations.com to find instructions for off-grid DIY’er Abe Connally’s Chispito wind generator, a horizontal-axis-turbine design that more than 200 builders have built and helped perfect. Made entirely of salvaged parts, such as a treadmill motor and recycled sewer pipe, the Chispito can generate 100 watts in a 35mph wind. And if you’re able to find all the supplies, you can build it for less than 30 bucks.

***

About the Journal

Covers solid-state chemistry, both inorganic and organic, and polymer chemistry, especially as directed to the development of materials with novel and/or useful optical, electrical, magnetic, catalytic, and mechanical properties.

http://pubs.acs.org/journal/cmatex?cookieSet=1

Hermetically Coated Superparamagnetic Fe2O3 Particles with SiO2 Nanofilms

Chem. Mater., Articles ASAP (As Soon As Publishable)
Publication Date (Web): April 23, 2009 (Article)
DOI: 10.1021/cm803153m
Figure